COLORdash™ Accent UV & VW QRG
Page 6 of 8
AUTO Mode
The AUTO mode allows the user to select one of 10 preset programs (0 to
9) for the COLORdash™ Accent UV or 12 preset auto programs (0 to 11)
for the COLORdash™ Accent VW. Select the AUTO program by setting
DIP switches [1] through [4], as per the table below.
AUTO Mode DIP
Switch Values
DIP
Switch 1 2 3 4
Value
1
2
4
8
Procedure
1) Set DIP switches [10] and [11] to
OFF
, and DIP switch [12] to
ON
(AUTO Mode).
2) Select the desired program (0 to 11) by setting DIP switches [1]
through [4] to ON or OFF until the sum of the value of the DIP
switches in the ON position matches the desired program number.
3) Refer to the examples below for more information.
Auto
Mode
Examples
a) To select AUTO program
0
, set DIP switches [1] through [5] to
OFF
and DIP switch [12] to
ON
.
b) To select AUTO program
9
, set DIP switches [1], [4], and [12] to
ON
.
STATIC
Mode
When selecting the STATIC mode, you can set the COLORdash™ Accent
UV and VW fixtures to various luminous intensities without a DMX
controller by using DIP switches [1] through [4], as per the table below.
STATIC Mode DIP
Switch Values
COLORdash™ Accent
VW UV
Color
Warm White
Cool White
Ultra Violet
Luminous Intensity
DS 1 DS 2 DS 3 DS 4 DS 1 DS 2
0 %
OFF OFF OFF OFF OFF OFF
30 %
ON OFF
ON OFF
ON OFF
60 %
OFF ON OFF ON OFF ON
100 %
ON
ON
ON
ON
ON
ON
Procedure
1) Set DIP switches [10] and [12] to
ON
, and DIP switch [11] to
OFF
to
select STATIC Mode.
2) Select the color intensity as indicated in the
STATIC Mode DIP Switch
Values
table.
COLORdash™ Accent UV & VW QRG
Page 3 of 8
Mounting
Before mounting any of these products, read the safety notes at the
beginning of the corresponding user’s manual and follow the mounting
procedure indicated there.
Product
Mounting
Diagram
AC Power
These products have an auto-ranging power supply that can work with an
input voltage range of 100~240 VAC, 50/60 Hz.
Power Wiring
These products come with a power cord that has an Edison plug (US &
Canada) on one end, while the other end is hardwired to the unit.
Use the table below if you need to change the plug or to adapt the power
connection to your particular market or installation,
Power Cord
Table
Connection Wire
(US)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
DMX
Connection
These products have a DMX cord with a Y splitter on one end, which has
two 3-pin XLR connectors, one male and the other female. The other end
of the DMX cable is hard wired to the unit.
DMX and
COLOR-CON
Controllers
The COLORdash™ Accent UV and VW can operate with either a DMX or
a COLOR-CON controller. Use the standard DMX connection to connect
these products to any of those controllers. For more information, please see
the corresponding user’s manual.
Master/Slave
Connection
The COLORdash™ Accent UV and VW can work as stand-alone units or
as masters of a series of other similar units. See the corresponding user’s
manual for more information.
