Chauvet colorband PiX IP User Manual Download

Page: 13 / 18

COLORband PiX™ IP User Manual (Rev. 2)

Page 13 of 18

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Static Color Mode

To enable the Static Color Mode, do the following:

1. Press

<MENU>

repeatedly until

C--

shows on the display.

2. Press

<ENTER>

3. Use

<UP>

<DOWN>

to choose a color (

C1-C7

4. Press

<ENTER>

Automatic Mode

To enable the Automatic Mode, follow the instructions below:

1. Press

<MENU>

repeatedly until

P--

shows on the display.

2. Press

<ENTER>

3. Use

<UP>

<DOWN>

to choose your auto program (

P1-P6

4. Press

<ENTER>

You can adjust the speed of the automatic program as well.

1. Press

<MENU>

repeatedly until

S--

shows on the display.

2. Press

<ENTER>

3. Use

<UP>

<DOWN>

to adjust the duration of each step of the automatic program

from

S001

(slow) to

S100

(fast).

4. Press

<ENTER>

Custom Static

Color Mode

To enable the Custom Static Color Mode, follow the instructions below:

1. Press

<MENU>

repeatedly until

U--

shows on the display.

2. Press

<ENTER>

to choose between colors (

r--

g--

b--

3. Press

<UP>

<DOWN>

to choose the intensity of the color (

r000-100

4. Repeat the steps to mix additional colors to create the color you need.

5. Press

<ENTER>

Touch Control

Panel Lock

To enable the touch panel lock, follow the instructions below:

1. Press

<MENU>

repeatedly until

PASS

shows on the display.

2. Press

<ENTER>

3. Press

<UP>

<DOWN>

until

shows on the display to enable the touch panel

lock.

To disable the touch panel lock so you can resume functionality, follow the steps below:

1. Press

<UP>

<DOWN>, <UP>

<DOWN>, <ENTER>

to disable the touch panel

lock.

2. Press

<MENU>

to move through the menus as normal.

In situations where water may flow onto the touch display, use the Touch Panel
Control Lock so that the water does not reset the product’s settings.

Summary of Contents for colorband PiX IP



















Search results

Summary of Contents for colorband PiX IP

Reviews:

Related manuals for colorband PiX IP

Brands by name

Popular brands

Chauvet colorband PiX IP, User Manual

Search results

Summary of Contents for colorband PiX IP

Reviews:

Related manuals for colorband PiX IP

Brands by name

Popular brands