19
Net-X II User Manual Rev. 5
Operation
Delete Step
This function deletes a step from the scene. To delete a step from the scene, follow the instructions below:
1.
Select the Scene to configure as instructed in
2.
Use the knob to select
Delete Step
.
3.
Press the knob.
Timing
This function sets the intervals between steps, as well as a fading effect if desired.
1.
Select the Scene to configure as instructed in
2.
Use the knob to select
5. Timing.
3.
Press the knob.
4.
Use the knob to select:
•
2.
Fade In Time:0.10S—9M59S.
•
Press the knob.
•
3.
Fade Out Time:0.10S—9M59S.
•
Press the knob.
•
4.
Delay Time:0.10—9M59S.
•
Press the knob.
•
5. Exit
(to cancel).
5.
Select
1. Save Step
menu option to save timing settings.
Trigger Settings
The Net-X II can assign a trigger to an external dry contact switch to trigger a recorded scene. When the
trigger is turned on, the Trigger Info will display on the display screen with the scene name, amount of
steps, and the timing set for that scene.
1.
Use the knob to select
12. Trigger Settings
.
2.
Press the knob.
3.
Use the knob to select
Trigger 1–4
.
4.
Press the knob.
5.
Use the knob to select the desired
Scene 1–10
.
6.
Press the knob.
Trigger Setting Diagram
The Net-X II can set recorded scenes to a trigger using the 5-wire Phoenix Connector on the rear of the
unit. Up to 4 triggers can be connected for momentary functionality.
A latching switch will be necessary to run indefinitely.
1
2
3
4
TRIGGER 1
TRIGGER 2
TRIGGER 3
TRIGGER 4
Trigger 1–4
labels
Trigger 1–4 Inputs
Ground Input
Ground label
Summary of Contents for Net-X II
Page 1: ...User Manual Version V1 9 ...
