18
Operation
Net-X II User Manual Rev. 5
User Preset
This option saves 4 different preset menu option configurations. To set these presets, follow the
instructions below:
1.
Use the knob to select
9. User Preset
.
2.
Press the knob.
3.
Use the knob to select one of the four following presets:
•
1. Art-net 8-port DMX
(Sets all 8 ports to receive 8 universes of Art-Net™ from 0–7).
•
2. sACN to 8-port DMX
(Sets all 8 ports to receive 8 universes of sACN from 1–8).
•
3. 1x8 DMX Splitter
(Sets the product to operate as a DMX splitter with all 8 outputs
receiving DMX from input A).
•
4. 2x4 DMX Splitter
(Sets
1–4
outputs to
input-port A
and the
5–8
outputs to
input-port B
).
•
5. Exit
(to cancel).
4.
Press the knob.
Factory Reset
To restore the Net-X II to factory default settings, do the follow:
1.
Use the knob to select
10. Factory Reset.
2.
Press the knob.
3.
Use the knob to select
NO
(do not reset) or
YES
(reset to factory settings).
4.
Press the knob.
Record Scenes
The Net-X II has the capability to record up to 10 scenes. To record scenes, follow the instructions below:
1.
Use the knob to select
11. Record Scenes
.
2.
Press the knob.
3.
Use the knob to select from
Scene 1–10
.
4.
Press the knob.
Scene Name
The Net-X II allows you to customize the name of each scene. To name a scene, do the following:
1.
Select the Scene to configure as instructed in
2.
Use the knob to select
1. Name:Scene_1–10
.
3.
Press the knob.
4.
Use the knob to select the letter, number or symbol, from
A–@
. There are 96 options.
5.
Repeat until the name is set as desired.
6.
Use the knob to select either
Enter
to save the name, or
Cancel
to exit without saving.
7.
Press the knob.
Scene Steps
This feature displays the amount of steps saved to the scene. To view previously saved steps, follow the
instructions below:
1.
Select the Scene to configure as instructed in
2.
Use the knob to select
2. Step:(0/0)
.
3.
Press the knob.
4.
Turn the knob to cycle through the saved steps.
Add Step
This function adds a step to the scene. To add a step to the scene, do the following:
1.
Select the Scene to configure as instructed in
2.
Use the knob to select
Add Step
.
3.
Press the knob.
When using the DMX splitter presets, DO NOT connect a network to the product.
This will erase any existing recorded scenes.
Summary of Contents for Net-X II
Page 1: ...User Manual Version V1 9 ...
