5
EN
QUICK REFERENCE GUIDE
DRB-F100CM QRG Rev. 1
Mounting (Hanging)
Before mounting this product, read the
, as well as those for the attached products.
Mounting Diagram (Hanging)
Mounting Procedure
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Insert the Rig Bar Speego locking bars into the female Speego connections on the F-Series panel.
3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4. Twist the tightening knob clockwise until F-Series panel is secure to the Rig Bar.
5. To detach the Rig Bar from the F-Series panel, reverse the previous steps.
Technical Specifications
Dimensions and Weight
Note
: Dimensions in inches are rounded.
Ordering
Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance
only. Do not release panel until the hanging hardware has been fully secured.
Length
Width
Height
Weight
39.35 in (999.6 mm)
2.36 in (60 mm)
4.72 in (120 mm)
20 lb (9.1 kg)
Load Capacity (Hanging)
Load Capacity (Stacking)
Recommended Shackles
1,300 lb (590 kg)
2,000 lb (900 kg)
1/2”, 5/8”
Product Name
Item Name
Item Code
UPC Number
DRB-F100CM
DRBF100CM
23091601
781462219499
Alignment
Conical (x4)
Male Speego
Connection
Tightening
Knob
Spring
Knob
Locking
Bar
Rig Bar Speego
Female Speego
Connection (x2)
(For use with
DRB Curve Kit)
!