EN
2
DRB-F100CM QRG Rev. 1
QUICK REFERENCE GUIDE
Product Overview
Product Dimensions
Removing the Hoist Ring (Optional)
To remove the hoist ring from the DRB-F100CM:
1. Remove the split pin from the pin hole in the castle nut locking the hoist ring in place.
2. Unscrew the castle nut from the hoist ring.
3. Lift the hoist ring out of the product.
4. To re-install the hoist ring, reverse the previous steps.
Warning! Replacing the hoist ring with other hardware may change the load capacity of the product!
Male Speego Connection
Female Speego Connection
Alignment Conicals
For TR16 Screw Jacks
Alignment Holes (x4)
Alignment Magnets (x5)
Alignment Bolts
Top View
Side View
Bottom View
Back View
39.35 in
999.6 mm
39.55 in
1,007.4 mm
4.72 in
120 mm
2.36 in
60 mm
5.2 in
132 mm
6.65 in
169 mm
Hoist Ring Assembly
Split
Pin
Castle
Nut
Pin
Hole
Hoist
Ring
!