Kinta FX ILS User Manual Rev. 5
Operation
IRC-6 Infrared Remote Control
The Kinta FX ILS can be operated with the CHAUVET IRC-6. To enable IR wireless control, follow the
instructions below.
1. Press
<MENU>
repeatedly until
SEt
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select from
on
or
oFF
.
4. Press
<ENTER>
.
IRC-6 Operation
Automatic Mode
To turn on automatic mode with the IRC-6:
1. Press
<AUTO>
on the IRC-6.
2. Press
<1>–<7>
to select the program (see
To adjust the speed of the automatic program:
1. Press
<SPEED>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the speed.
Sound-Active Mode
To turn on sound-active mode with the IRC-6:
1. Press
<SOUND>
on the IRC-6.
2. Press
<1>–<7>
to select the program (see
Manual Control
To manually select the kinta effect color with the IRC-6:
1. Press the desired color, from
<R>
(red),
<G>
(green),
<B>
(blue), or
<W>
(white).
Strobe
To set the strobe with the IRC-6:
1. Press
<STROBE>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the strobe speed.
Black Out
To black out the product with the IRC-6:
1. Press
<BLACK OUT>
on the IRC-6.
This will turn off all the LEDs until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing
<BLACK OUT>
.
Black Out may have been activated.
The buttons on the IRC-6 not listed above are reserved for future use.
BLACK
OUT
AUTO
SOUND
SENSI-
TIVITY
SPEED
STROBE
%
MANUAL
FADE
R
G
B
W
UV
A
+
0
-
1
2
3
6
5
4
7
8
9
