Chauvet DJ KINTA FX ILS, User Manual

Page: 21 / 124

Page 14 of 117
Kinta FX ILS User Manual Rev. 5
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Preset Kinta Effect
To run the Kinta FX ILS with a static preset kinta effect color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the desired colors, from C 1–15 . (see Colors and Programs )
4. Press <ENTER> .
Automatic Programs
To run the Kinta FX ILS with an automatic program, follow the instructions below.
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the desired program, from P 1–7 . (see Colors and Programs )
4. Press <ENTER> .
5. Use <UP> or <DOWN> to select the program mode, from FAdE (fading) or SnAP (quick change).
6. Press <ENTER> .
Automatic Program Speed
To set the automatic program speed of the Kinta FX ILS, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to increase or decrease the speed, from S. 00–99 (slow to fast).
4. Press <ENTER> .
Sound-Active Programs
To run the Kinta FX ILS with a sound-active program, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the desired program, from Snd1–7 . (see Colors and Programs )
4. Press <ENTER> .
5. Turn the music on and adjust the sound sensitivity knob until the product starts responding to the
beat of the music.
– 7
Laser color
(Ch. 8 must be active for
strobe)
000  009 No function
010  049 Red
050  089 Green
090  129 Red and green
130  169 Red and strobing green
170  209 Green and strobing red
210  255 Red and green alternating strobe
– 8 Laser strobe
000  009 No function
010  254 Laser strobe, slow to fast
255 Sound-active laser strobe
– 9 Laser rotation
000  004 Stop
005  127 Counterclockwise rotation, slow to fast
128  133 Stop
134  255 Clockwise rotation, fast to slow
For manual operation of LEDs and lasers using DMX control, set Channel 1 to 000  009.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
• The product will only respond to low frequencies of music (bass and drums).
• The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
2-Ch 9-Ch Function Value Percent/Setting