CH-02 QRG
EN
5
Description
The CH-02 is a heavy-duty aluminum T-bar stand with side bar supports,
8 optional mounting points, and quick release pins for easy setup and
teardown. The CH-02 is great for mobile DJs and entertainers.
Assembly
Instructions
To assemble the CH-02, refer to the diagrams on the following pages and
do the following:
Figure 1:
1.
Loosen lower knob on the tripod assembly.
2.
Open the tripod legs and place the product on the floor
(or level surface) so the center shaft is vertical.
3.
Tighten the lower knob on the tripod to secure it.
4.
Loosen the upper knobs on the center shaft.
5.
Extend the inner tube of the center shaft.
6.
Tighten the upper knobs on the center shaft to secure the tube in place.
Figure 2:
7.
Assemble the supported side bars. See
T-bar and Side Bars
Assemblies
and
T-bar and Side Bars Finished View
for more
information and close-up views.
8.
Slide the supported side bars assembly over the shaft and secure it at
the desired height by tightening the bolts.
Note:
Be sure to tighten all the bolts of the side bars assembly.
Figure 3:
9.
Assemble the T-bar with supports. See
T-bar and Side Bars
Assemblies
and
T-bar and Side Bars Finished View
for more
information and close-up views.
10.
Slide the T-bar with supports over the top of the shaft and secure it
into place by tightening bolts.
Note:
Be sure to tighten all bolts of the T-bar assembly.
Summary of Contents for CH-02
Page 1: ...CH 02 Quick Reference Guide ...
Page 9: ...CH 02 QRG EN 9 T bar and Side Bars Assemblies T bar Assembly Side Bars Assembly ...
Page 54: ...CH 02 GR IT 54 Gruppi Barra a T e Barre Laterali Gruppo Barra a T Gruppo Barre Laterali ...
Page 71: ...CH 02 QRG RU 71 Блоки тавровой балки и боковин Блок тавровой балки Блок боковин ...
