5
EN
QUICK REFERENCE GUIDE
4BAR Flex Q ILS QRG Rev. 2
Wireless Footswitch Operation
The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation
through the 4BAR Flex Q ILS microphone.
To use the footswitch:
1. Connect the 4BAR Flex Q ILS to power. Turn the wireless footswitch on.
2. Press
<MENU>
repeatedly until
SEt
shows on the display, and press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select
ir
, and press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
on
, and press
<ENTER>
.
5. Press
<MENU>
repeatedly until
P--
shows on the display, and press
<ENTER>
.
6. Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and
FOOt
will appear on the Menu display.
7. Use the chart below to activate the desired function.
Footswitch Battery
The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be
replaced when necessary.
Battery Replacement
To replace the battery in the wireless footswitch:
1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct
electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
Pedal
Action
Function
1
(Auto Programs)
Tap pedal to activate, then tap to
navigate to desired function
Auto programs 1–8
2
(Sound Mode)
Press and hold
Sound-active programs
3
(Static Colors)
Tap
Static colors C1–18
Auto snap program
Auto fade program
Press and hold
Auto fade program
4
(Blackout)
Tap
Blackout
Press and hold
Fade to blackout
The 4BAR Flex Q ILS footswitch will work properly in any mode, with a maximum unobstructed distance
of 100 ft (30.5 m). You must turn on the ir setting from the 4BAR Flex Q ILS and navigate to Auto mode
before using the footswitch.
Do NOT over-tighten the screws!
Power switch
LED indicators
9-volt battery cover
1
2
3
4
