EN
2
4BAR Flex Q ILS QRG Rev. 2
QUICK REFERENCE GUIDE
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
It is possible to power link up to 6 4BAR Flex Q ILS products on 120 V or up to 13 products on 230 V. Never exceed this
number. Power-linking cords can be purchased separately.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type
and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
.
Mounting Diagram
Control Panel Description
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
Safety cable
(such as
CH-05
from Chauvet)
Mounting clamp (x2)
(such as
CLP-15
from Chauvet)
Tripod insertion
point w/ adjustment
knob for tightening
(tripod sold separately)
Hanging
bracket (x2)
Pod tilt
adjustment knob
(x2 per pod)
Pod pan
adjustment
knob (x4)
