5.2 PAIRING XBI2 UNITS TOGETHER
*** MAIN UNIT MUST BE ON AT ALL TIMES TO COMMUNICATE BIKE-TO-BIKE ***
5.2.1 PAIRING 3 XBi2 UNITS TOGETHER - RIDER:1 (MAIN) RIDER:
2 (SATELLITE 1) RIDER:3 (SATELLITE 2)
1. Turn on Main, Satellite (1) and Satellite (2) units on
2. Get the Main unit. Press & hold the Power button and the Mode button
simultaneously
3. LED will start to fl ash RED and occasional BLUE after 3 seconds
4. Release both Power button and the Mode button
5. Now get the Satellite (1) unit. Press the Power button and the Mode but-
ton simultaneously for one second *
6. LED will start to fl ash
7. Immediately get the second Satellite (2) unit. Press the Power button
and the Mode button simultaneously for one second *
8. LED will start to fl ash
9. If pairing sequence was done correctly all three XBi2 units will turn
themselves off
First: Satellite (1)
Second: Satellite (2)
Third: Main
10. Pairing is now complete, XBi2 units are now paired and will connect to
each other automatically when units are on and within range of each other
5.2.2 PAIRING 2 XBi2 UNITS TOGETHER - RIDER:1 (MAIN) RIDER:2
(SATELLITE)
*** MAIN UNIT MUST BE ON AT ALL TIMES TO COMMUNICATE BIKE-TO-BIKE ***
1. Turn both Main and Satellite unit on
2. Get the Main unit. Press & hold the Power button and the Mode button
simultaneously
3. LED will start to fl ash RED and occasional BLUE after 3 seconds
4. Release both Power button and the Mode button
5. Immediately get the Satellite unit. Press the Power button and the Mode
button simultaneously for one second *
6. LED will start to fl ash then unit turns itself off quickly
7. The main unit will turn itself off 8-10 second after the Satellite unit is off
8. Pairing is now complete
9. XBi2 units are now paired and will connect to each other automatically
when both units are on and within range of each other
* Do not delay the process or the XBi2 units will go on timeout mode and
need to start the pairing process over
9
xbi2_maual.indd 11
4/15/09 3:40:50 PM
