background image

5

Neo Vacuum Module Manual

• 

In the event of all 300-Level or a 200-Level error message that cannot be 
resolved, immediately stop all use of the system, and contact the dealer or DJO 
for service. Errors and Warnings in these categories indicate an internal problem 
with the system that must be tested by DJO or a Trained Technician before any 
further operation or use of the system.

-  Use of a system that indicates an Error or Warning in these categories 

may pose a risk of injury to the patient, user, or extensive internal 
damage to the system.

• 

Disconnect the system from the power source before attempting any 
maintenance, installation, removal or replacement procedures to prevent 
electrical shock and possible damage to system.

• 

Vacuum electrodes should not be used on patients with thin, papery skin. 
Vacuum may lead to contact difficulty and bruising.

• 

Vacuum electrodes are not suitable for patients who are taking steroids, due to 
the likelihood of bruising.

• 

Handle, clean and dispose of components and accessories that 
have come in contact with bodily fluids according to National, Local 
and Facility rules, regulations and procedures. 

• 

The solvents of adhesives and flammable solutions used for 
cleaning and disinfecting should be allowed to evaporate before 
the unit is used.

• 

Device is not designed to be used in oxygen rich environment.  
Explosion hazard if the device is used in the presence of flammable 
anesthetic mixture with air, oxygen, or nitrous oxide.

DANGER

WARNING

Summary of Contents for Neo Vacuum Module






Reviews: