3
Neo Stimulation Channel 1 & 2 + EMG Module Manual
MODULE INSTALLATION (CON’T)
Cable Insertion
Shown below is the Cable Insertion location
For complete User Operating Instructions, including
Cautions, Warnings, Dangers, Indications, and
Contraindications, refer to the respective User’s Manuals.
• Domestic Market, US only, refer to Vectra Neo Clinical
Therapy System User Manual, item #13-7646 (CD
Version, item #13-7647).
•
International Market, refer to Intelect Neo Clinical
Therapy System User Manual, Item #13-7651 (CD
Version, item #13-7652).
• To obtain a copy, contact your local representative or
DJO Customer Care.
6. Using a #2 Phillips screwdriver, secure the module
with the provided 8-32 x 5/16” screw at the bottom
tab, as shown.
7. Insert the faceplate with connection openings,
supplied with module, on the Left side at the bottom
and snap into place at the top as shown. Insert a
blank faceplate on the Right side.
8. Plug in the unit and press the power button, allow
the unit to initialize and then verify that the newly
installed module is shown as available on the Home
screen.
