background image

4

Intelect

®

 Legend Series Stim

SAFETY PRECAUTIONS

• 

DO NOT remove the cover. This may cause unit damage, 

malfunction, electrical shock, fire, or personal injury. There are 

no user-serviceable parts inside the unit. If a malfunction occurs, 

discontinue use immediately and consult the dealer for repair 

service.

• 

Nylatex

®

 Wraps contain dry natural rubber and may cause allergic 

reactions in patients with allergies to latex.

• 

Powered muscle stimulators should be used only with the leads and 

electrodes recommended for use by the manufacturer.

• 

Before administering any treatment to a patient you should become 

acquainted with the operating procedures for each mode of 

treatment available, as well as the indications, contraindications, 

warnings, and precautions. Consult other resources for additional 

information regarding the application of electrotherapy.

• 

To prevent electrical shock, disconnect the unit from the power 

source before attempting any maintenance procedures.

• 

Keep electrodes separated during treatment. Electrodes in contact 

with each other could result in improper stimulation or skin burns.

• 

Stimulation should not be applied over the anterior neck or mouth. 

Severe spasm of the laryngeal and pharyngeal muscles may occur 

and the contractions may be strong enough to close the airway or 

cause difficulty in breathing.

• 

Stimulation should not be applied transthoracically because the 

introduction of electrical current into the heart may cause cardiac 

arrhythmia.

• 

Stimulation should not be applied over swollen, infected, and 

inflamed areas or skin eruptions, e.g., phlebitis, thrombophlebitis, 

varicose veins, etc.

• 

Stimulation should not be applied over, or in proximity to, cancerous 

lesions.

• 

Output current density is inversely related to electrode size. Improper 

application may result in patient injury.

• 

These devices are restricted to sale by, or on the order of, a physician 

or licensed practitioner. This device should be used only under the 

continued supervision of a physician or licensed practitioner.

• 

Make certain the unit is electrically grounded by connecting only to a 

grounded electrical service receptacle conforming to the applicable 

national and local electrical codes.

• 

Care must be taken when operating this equipment around other 

equipment. Potential electromagnetic or other interference could 

occur to this or to the other equipment. Try to minimize this 

interference by not using other equipment in conjunction with it.  

(i.e. cell phones, etc.)

• 

The user must keep the device out of the reach of children.

• 

Long term effects of chronic electrical stimulation are unknown.

Summary of Contents for LEGEND INTELECT STIM 2S






























Reviews: