Chattanooga Intelect RPW User Manual Download Page 67

Page: 67 / 94

Intelect® RPW

OPERATION

USING CLINICAL RESOURCES - PATIENT CARD (CONTINUED)

Erasing Patient Card

Use this button to remove all information on the Patient Card.

1 .

To delete all information on
the Patient Card, insert the
patient card to be erased
into the Patient Data Card
Port.

2 .

Press the Erase Patient Card
button. A message displays
to verify the deletion.

Press the No button if you
do not want to erase all the
information on the Patient
Card. You are returned
to the Clinical Resources
screen.

Press the Yes button to
erase all the information on
the Patient Card.

NOTE:

By pressing the

Yes button, you
will permanently
remove all data on
the Patient Card.

You are returned to the
Clinical Resources Screen.

Summary of Contents for Intelect RPW































































































Search results

Summary of Contents for Intelect RPW

Reviews:

Related manuals for Intelect RPW

Brands by name

Popular brands

Chattanooga Intelect RPW, User Manual

Search results

Summary of Contents for Intelect RPW

Reviews:

Related manuals for Intelect RPW

Brands by name

Popular brands