Intelect® RPW
9
WARNING
•
This equipment is not designed to prevent the ingress of water
or liquids. Ingress of water or liquids could cause malfunction of
internal components of the system and therefore create a risk of
injury to the patient.
•
Care must be taken when operating this unit adjacent to or stacked
with other equipment. If adjacent or stacked use is necessary, the
Intelect RPW should be observed to verify normal operation in the
configuration in which it will be used. Potential electromagnetic
or other interference could occur to this or other equipment. Try
to minimize this interference by not using other equipment in
conjunction with it.
•
Use only accessories that are specially designed for this unit. Do
not use accessories manufactured by other companies on this unit.
DJO is not responsible for any consequence resulting from using
products manufactured by other companies. The use of other
accessories or cables (other than those specified) may result in
increased emissions or decreased immunity of this unit.
•
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous exposure to
radial pressure wave energy.
•
Make certain that the unit is electrically earthed by connecting
only to a earthed electrical service receptacle, conforming to the
applicable national and local electrical codes.
•
This device should be kept out of the reach of children.
•
Do not leave patient unattended during radial pressure wave therapy.
•
Improper installation, operation, or maintenance of the
radial pressure wave system may result in malfunctions of
this unit or other devices.
•
User must not make modification to the equipment using
non-DJO, LLC parts.
•
In case of display failure or other obvious defects, switch
the unit off immediately by means of the power on/off
button, disconnect the power cord from the power outlet,
and notify a certified service technician.
•
Adjustments or replacement of components may result
in the equipment failing to meet the requirements for
interference suppression.
•
If the unit cannot be installed immediately after delivery,
the unit and its external components or accessory
elements must be stored in their original packaging in a
dry place.
•
Do not store or operate the unit in a dusty environment.
•
Position the unit to ensure safe and easy accessibility to
power cord.
•
Keep all line cords away from the unit cables. Do not
store or coil line cords where they can come close to the
cables on an operating radial pressure wave unit. Position
the power cord in such a way that it does not present a
tripping hazard.
•
Do not block the air vents.
WARNING