Use a 3/8” wrench to tighten the brake line
adapter fitting. The hose end of the fitting
should point toward the lower caliper-
mounting bolt when tight.
Remember, the caliper is aluminum and the
fitting is steel. Do not over tighten and strip
the threads in the caliper.
Thread the swivel end of the stainless steel
brake line onto the adapter fitting until it is
finger tight.
Drill and tap the side of the frame for two 10-
32 threaded holes. These holes will position
the brake line tab 2” below the top of the
frame and 2-1/2” ahead of the weld at the
dropped crossmember.
Page
50
917704
Summary of Contents for 7704
Page 105: ...Page 104 917704 ...