Next, chase the threads in the lower A-arm
mounts with the 5/8-18 tap and blowout any
remaining particles.
Now, apply some anti-seize to the threads of
the pivot stud. Also put anti-seize inside the
bore of the A-arm mounts. Insert one of the
lower A-arm pivot studs and then run it in all
the way to its stop, it should go in easy. Use
the same procedure to verify all of the pivot
studs will easily thread into their mounting
locations.
The lower A-arm fits tight over the mount.
Slide the rear of the A-arm onto the mount
and then use a piece of wood between the
frame and the A-arm to pry it over the
mount. A 12” piece of 1x2 works well.
REAR
Page 12
917704
Summary of Contents for 7704
Page 105: ...Page 104 917704 ...
