Chassis Plans CPX2-173, Technical Reference, Page: 51 / 54

Chassis Plans CPX2-173 Technical Reference Appendix D – Ethernet Network Connection
Page 45
Configure

Firmware Version Firmware version of CPX2-173

MAC Address MAC address of IP controller

Host Name ID name without space (max. 15 character)

DHCP DHCP client mode enable/disable

IP Address IP address (assigned automatically if DHCP mode enable)

Subnet Mask Address Subnet Mask Address

Default Gateway Address Network Gateway Address

Primary DNS Address Network DNS Address
Image D-3 – Network Configure Settings
In cases where the CPX2-173 is setup behind a firewall and cable/ADSL modem. The following provides details
so it can be directly accessed over internet by typing the dedicated IP address on web browser.
Connect to a single CPX2-173

Connect the CPX2-173 to a router using Cat-5 cable.

It is suggested to use “DMZ” function on the router. The standard ports required by the CPX2-173 is
shown as below:
Table D-1 – Remote Control
To setup DMZ function on your router, you may refer to the following procedure for your reference. (Different
routers will has its different setup methods; please refer to the user manual of your router.)