Chassis Plans CPX2-173, Technical Reference, Page: 12 / 54

Chassis Plans CPX2-173 Technical Reference Chapter 1 - Introduction
Page 6
Specifications
Enclosure
6U (10.47”) x 3.2” deep
Front Panel milled 5052 aluminum alloy
Body made of 5052-H32 aluminum alloy
All stainless steel hardware
All self-locking pressed in fasteners where
appropriate
Powder coat black, medium texture, for ruggedness
Other colors optionally available
Designed to Mil-Spec Standards to Satisfy Military,
Industrial and Commercial Requirements
Compact Enclosure for Limited Depth Installation
Weight: 9.7lbs (depending on model & features)
Display
17.3" Wide-Screen TFT LCD 1920 x 1080
Display Colors: 16.7 Million
Response Time: 40ms Typical
Viewing Angle: 80 deg
Contrast Ratio: 600:1 typical native
Brightness: 400cd/m2 standard (CPX2-1731),
1000cd/m2 enhanced daylight visibility (CPX2-
1732)
Pixel Pitch: 0.1989mm x 0.1989mm
Pixel Arrangement: R.G.B Stripe
Display Enhancement Options
3mm smudge-resistant anti-reflective coated soda
lime float glass,bonded to the LCD panel with
optical index matched adhesive
Laminate of 1.1mm smudge-resistant anti-reflective
coated soda lime float glass panel and a 1.1 mm
ITO coated glass panel(<12.5
Ω
/sq) grounded via
a copper buss bar, bonded to the LCD panel with
optical index matched adhesive
Power Supply Options
AC Input
100 to 260VAC, auto selecting
47-66 HZ
12VDC Input Transient Filter
Line transient protection for 12VDC vehicular
applications
Mil-Std-1275A DC/DC Converter
True 1275 compliance for military 28VDC
nominal vehicle inputs
18 to 36VDC input
48VDC DC/DC Converter
36 to 75VDC Input
Isolated Inputs for +/- input levels
See the appropriate power supply section for complete
power supply specifications.
Environmental
(Designed to meet or exceed)
Altitude
10,000 ft. Operational,
30,000 ft. Storage
MIL-STD-810, Method 500.5
High Temperature
70°C Operational, 70°C Storage
MIL-STD-810, Method 501.5
Low Temperature
0°C Operational, -20°C Storage
MIL-STD-810, Method 502.5
Humidity
5-95%, Non-condensing
MIL-STD-810, Method 507.5
Blowing Sand and Dust
Procedures I and II
MIL-STD-810, Method 510.5
Transport Vibration
US Highway Truck and Air Transport
MIL-STD-810, Method 514.6
Bench Handling Shock
Procedure VI, 20G @ 11ms
MIL-STD-810, Method 516.6
Table 2 – Specifications