Chassis Plans CPX2-173, Technical Reference, Page: 34 / 54

Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming
Page 28
Table 11 - Standard Controller Parameter Setting - Immediate, Relative, Reset and Query
Function Command Description Acknowledge (if enabled)
Volume control -
left+right channel
0x80, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?”
Set audio (L+R) volume =
value/increment/decrement
Reset
Query volume
Range : “0””0”-“1””E”
Default : “0””F”
Volume control -
on/off (mute)
0x80, “m” | “M”,
“0” |
“1” |
“r” | “R” |
“?”
Disable audio output.
Enable audio output.
Reset
Query
“0” - audio off (muted).
“1” - audio on.
Brightness control 0x81,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, nn
“o”, ss,
Set brightness =
value/increment/decrement
Reset
Query Current Source
Maximum query *1
Minimum query *1
Set, Source, value *1
Query, Source *1 Brightness.
Range : “4””E”-“B””2”
Default : “8””0”
ss - reference by Input main
select(0x98)
Contrast control -
all channels
0x82, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i ” , ss, nn
“o”, ss,
Set all contrast =
value/increment/decrement
Reset
Query
Maximum query *1
Minimum query *1
Set, Source, value *1
Query, Source *1
Contrast
Range : “1””C”-“E””4”
Default : “8””0”
ss - reference by Input main
select(0x98)
Saturation control* 0x83,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, nn
“o”, ss,
Set color =
value/increment/decrement
Reset
Query
Maximum query *1
Minimum query *1
Set, Source, value *1
Query, Source *1 PAL/NTSC color (In video mode
only )
Range : “0””1”-“F””F”
Default : “8””0”
ss - reference by Input main
select(0x98)
Hue control* 0x84,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, nn
“o”, ss,
Set tint =
value/increment/decrement
Reset
Query
Maximum query *1
Minimum query *1
Set, Source, value *1
Query, Source *1 NTSC tint (In NTSC mode only)
Range : “5””3”-“9””F”
Default : “7””9”
ss - reference by Input main
select(0x98)
Phase (tuning)
control 0x85,
nn | “+” | “-” |
“?”
Set dot clock phase =
value/increment/decrement
Query Dot clock phase.
(In PC mode only)
Image H position 0x86,
nnnn | “+” | “-” | “?”
Set img_hpos =
value/increment/decrement
Query
Image horizontal position.
(In PC mode only)
# - Function in ARGB mode only
* - Implemented only in standard controller. Not applicable to Advanced HD/SDI Controller.