Maintenance and Precautions
Other
1. Do not turn on the LED lights before entering the water to avoid damages.
2. Check if the Thrusters/propellers are getting stuck by seaweed or external matters, rinse the ROV with fresh water and then dry and put
it back in the packing box.
3. Remote control cannot be washed with water, please clean it with towel.
4. The pull ring at the end of the battery can only be used to remove the battery, not to lift the ROV, otherwise it may damage the ROV.
5. Do not place heavy objects on drone or accessories to avoid possible damage.
6. People under the age of 16 should only use this drone under adult supervision.
7. When not in use, please do not expose the drone and accessories under sunlight. Store it in a cool place orin a special box.
8. Chloride or other chemicals can erode GLADIUS MINI. Do not use if the pool is under high chlorine level.
You could have the latest user manual by the
http：//www.chasing.com
This content is subject to change without prior notice.
Camera
CMOS
Aperture
Focal Length
ISO Range
Field of View
Maximum Image Resolution
Image File Types
Video Resolution
Video Maximum Stream
Video Type
SD Card Memory
1/2.3 inch
F3.0
4.0mm
100-3200 (Still camera only)
95°
12M(4000*3000)
JPEG/DNG
FHD：1920x1080 30Fps
FHD：1920x1080 60Fps
FHD：1920x1080 120Fps
UHD： 3840x2160(4K) 30fps
60M
MP4
64G
3A/12.6V
2h (Maximum image resolution)
Adapter
Drone charging time
Adapter
Brightness
Color Temperature
CRI
Maximum Power
Dimming
2x1200LM
4000K-5000K
80
2x10W
Manually adjustable
Dimmable LED Lights
Three-axis gyroscope/acceleration/compass
+/- 1.64 ft
+/- 35.6℉
IMU
Depth Sensor
Temperature Sensor
Sensor
Navigation Safety
1
Battery Protection
2
Open sea
navigation
Relatively clear
water quality, no
dense seaweed
No dense radio
or radar signals
Do not dive
more than
330 ft
330ft
Charging Protection
3
·Only use the Chasing standard adapter.
·Red light means charging.
·Green light means fully charged.
Do not run out
of battery power
Charge when
power is less
than 25%
When not in use,
keep battery power
at 50% - 70%
Working
temperature
-10 °C ~ 60 °C
( -18°F-140°F)
a. Do not touch the propellers of the Thruster
b. Do not unlock the Thruster for more than 30 seconds in the air to
avoid overheating
c . After using the ROV in the salt water, please put it in fresh water
for about 1 hour and turn it on, let the drone run for10 minutes to
discharge the salt, and try out the water after cleaning with a towel.
Thruster/ Propeller
5
Connector Sockets / Tether Connectors
6
Check the Connector socket and tether pre-dive, keep dry and clean.
Salt and moisture may cause corrosion of theconnector. Be sure to
wash the socket with fresh water if the interface has water stains,
and make the connectors dry after cleaning.
O-ring
4
·
Check whether the O-ring on the tether
connector pre-dive. If it is missed or
damaged, please replace it in time.
Support
Any questions about our products please contact by [email protected] or leave a message on the Chasing Website
(https://www.chasing.com) chatting window.
