5
Connect extractor hose to thicknesser table under the front table. The three studs in the extractor
nozzle slot into the corresponding holes on the table.
Raise thicknesser table again by turning handle clockwise, until nozzle fits tightly to underside of
table.
Fit adapter on nozzle and connect to extractor system.
Thicknessing
Slacken width adjustment knob (5) on blade guard (4), and push clear of blade housing (10).
Fit extractor to back table using handle (a).
Fit adapter on nozzle and connect to extractor system.
Setting guide fence
Set guide fence at desired angle (90-135°) using adjustment screw (b)
Insert plug in mains socket.
