Open the remaining cartons, unpack all the components and check everything is present.
Cutter Hood Vertical Pressure Guard Tool Carriage Rubber
Hood Bolts Plate Parts Tray Parts Feet
Fence Horizontal Pressure Table Spindle Arbor Router Hood
Halves Plate Inserts & Spacers Collet Cover
Assembly
To assemble the base.
Locate:
4 Panels
4 Feet
12 x M6 Bolt, Washer and nut
Screw the 4 feet into the
threaded holes in the 2 side
panels of the base.
Use a 17mm spanner to tighten
them.
After full assembly of the
machine, the feet can be
adjusted to level up the machine.
