Fit the 2 long bolts through the
slots in the hood and then screw
them into a pair of holes in the
table.
The hood can be fixed in
different positions depending on
the size of the work piece.
The cover is hinged to provide
quick access to the spindle to
change the tooling.
To lock the cover down, unscrew
the locking knob, slide the clamp
away from the centre of the hood
so that the tongue fits under the
hood, tighten the locking knob.
Do the same on the other side.
This cover MUST be closed and
locked when the machine is in
operation.
Fence depth Adjust screw Fence depth lock knob
Fence width lock Fence fixing plate
Loosen the fence depth locking
knob and the silver fence width
lock.
Slide the fence over the fixing
plate so that the mitred end of
the fence is closest to the
spindle.
Wind the fence depth adjusting
screw, so that the fence sits
back against the hood, then lock
it in place with the depth locking
knob and the fence width lock.
