Charmhigh-V1.0-2016 |
32
All Rights Reserved
Figure.
11-3
b) Put the calibration board on up camera, adjust position of calibration board to
centering the cross on screen, keep calibration board do not move, click “Set” to
next, popup window as show below;
Figure.
11-4
c) Move position of down camera to center
ing the cross on screen, click “Set” to
finish.
(2)
Nozzle 1\2 position calibration:
Click button to popup window, move nozzle to
the center of screen to calibrating, note, ensure that up camera position is
