[7]
VARIO_WAir_Users_Manual_ver_301_GR_EN_1.docx
Operation
When powered VARIO W-Air controller starts operating and shows some indicative messages in the
display. Then temperature of the sensor is shown on the display.
When being in “Off” state device shows the “Off” message end the respective led indicator lights on. In
this state no control is performed.
Switch between “On” και “Off” state by lengthy pressing of Power button.
While being in “On” state the “Off” indicator is switched off and controller operates according to the
selected operational mode.
Switch among the available operational modes by pressing momentarily the Power button. The
respective light indicator shows the operational mode selected.
o
Manual
(MAN) Indicator MAN is on. Blower is running no matter that the temperature if the
sensor is. The rotation speed of the blower can be adjusted by «
» and «
» keys. During
adjustment the display shows the rotation selection value instead if the constantly shown
temperature. Blower speed can be adjusted on 20-150 range.
o
Standby
(STBY) Indicator STBY is on. Blower is running on constant rotation speed when
temperature exceeds
ACt
value. Rotation speed on standby can be adjusted by «
» and «
»
keys. During adjustment the display shows the rotation selection value instead if the constantly
shown temperature. Blower speed can be adjusted on 20-150 range.
