manualshive.com logo in svg

Charmate CM155-041, Quick Start Manual, Page: 6 / 12

Share
Download
Charmate CM155-041 Quick Start Manual Download Page 6

7

6

Assembly Instructions

Hardware

For Easiest Assembly:

•  To avoid losing any small components or hardware, 

assemble your product on a hard level surface that 
does not have cracks or openings. You may wish to lay 
down a blanket or similar, to avoid possible damage to 
the finish during assembly.

•  Clear an area large enough to layout all components 

and hardware.

•  Great care has been taken during production to remove 

sharp edges but you should handle all components 
with care to avoid injury.

•  Check you have all components before beginning.
•  When applicable, tighten all hardware connections by 

hand first. Once the step is completed go back and fully 
tighten all hardware.

•  Follow all steps in order to properly assemble your 

product.

Typical assembly: approximately ½ hour.

Tools Needed:

•  

5/16” Open End Wrench

•  

Slotted Screwdriver

•  

Pliers

•  

Phillips Head Screwdriver

A. 

φ

6x16 Washer 

Qty. x14

B. M6x110 Screw
Qty. x2

C. M6 Nut
Qty. x6

D. M6x20 Screw
Qty. x6

E. M6x16 Screw
Qty. x4

F. M6x25 Screw
Qty. x6

G. M6x12 Screw
Qty. x4

Summary of Contents for CM155-041













Reviews:

No comments