Start with panel 01. Fix the already sorted
panels at the apex with the right hand and
pull up the next panel with the left hand,
starting at the base.
Position the sewn-on reinforcement tapes
along the center line and always keep
them slightly on tension. Make sure that
the reinforcement tapes are not confused
with the lap seams!
Stabilo triangles are attached to the lateral corners. A special folding technique for
these parts is not required. Continue folding the canopy to the rear gap (path 8 for
DIAMONDcross 100 & 125, path 10 for DIAMONDcross 160, path 12 for DIAMONDcross
220).
Due to its asymmetrical lines, the
DIAMONDcross has only one
packing loop. However, this is
sufficient and saves time when
packing. The packing loop is
attached at the same strap as the
front red marking.
Operating & packing instructions | DIAMONDcross
29
