12
PREPARATION BEFORE USE
6.1 The appliance can be operated by both remote control and the manual
controls on the appliance.
NOTE: To use both remote and manual functions, the manual on/off switch
must be in 'ON' position. In order to prevent the product becoming too hot,
there is 10s delay when turning on the heater and a 10s delay when turning
off the heater fan.
Batteries
Ensure that the remote controls batteries are new and inserted correctly.
Main Power Switch
6.2 The mains power switch is located on the control panel located on the
upper side of the heater outlet.
6.3
Press the Main Power Switch to ON (
—) before operating either the
remote or manual controls buttons.
6.4 A long beep is heard to indicate the fire is ready for use.
NOTE: The manual buttons are on the front right side of the appliance
which just control basic functions, not a full range of controls. Use the
remote controls to carry out all functions.
Flame Setting Button
Lights ON/OFF Button
Heater Running Indicator
Reset Button for
Remote Control
Fuel Bed Button
Main Power Switch
ON/OFF
RESET
LIGHTS FLAME FUEL
ON/OFF
BED
6a.1
MAIN SWITCH:
Press
“ ” to turn on the appliance ;Press “o” to turn off it.
6a.2
LIGHTS ON/OFF:
Press button LIGHTS ON/OFF to turn on/off flame
、
downlight
fuel bed and mood light.
6a.3
FLAME:
Press button FLAME to select 3 kinds of flame effect and OFF setting
.If the flame was turned off by pressing button LIGHTS ON/OFF and the flame
was not at OFF, the current flame effect will be memorized. Otherwise, if the
flame was at OFF, press button Flame to turn on the default setting.
