8
Front view (only the front window is visible)
When you unpack the appliance, you will notice that the side panels have been
fixed on the appliance, which makes the appliance visible on only one front side.
Front and one side view (the front and one of the side windows are visible)
Front and two sides view (the front and both sides windows are visible)
Remove the side panels from the ends you want to view to enable dual or triple
aspect as required .Then fix the edging strips using the screws taken from the
removal of the side panel(s)
Removing the front glass panel
⚫
Remove the 2c/s screws and remove the glass retaining strip as shown
below.
⚫
Use a suction cup(s) provided to support the middle of the glass panel
and lift the panel upwards and pull it forwards at its lower edge. Carefully
lift glass away as shown below.
