7
●
Operating by Remote Handset
Multifunction Infrared Remote Handset
Make sure the batteries are installed properly in the remote control.
The effective range of the remote control is up to 4 meters or 13 feet.
ICON
TITLE
FUNCTION
POWER
Pressing once turns the appliance and
flame effect on. Pressing again turns the
appliance and flame effect off.
FLAME
The fire has four flame effects, by pressing
the flame effect button the unit will cycle
through each effect.
HEATER
Pressing once turns 1000W of power on.
(Pilot lights illuminated
●○
)
Pressing again turns 2000W of power on
(Pilot lights illuminated
●●
)
Pressing third time turns the heater off.
(Pilot lights illuminated
○○
)
ROOM TEMP /
THERMOSTAT
Digital display shows a default TEMP
setting. To set the desired room temp press
the button and the TEMP will increase by
1°C up to 28°C when pressed each time.
The heater will cut out automatically once
the desired temperature is reached.
By pressing this button for 3 seconds the
digital display can change between °C and
°F.
TIMER
Once the appliance has been turned on,
you can program a length of time you would
like the appliance to run. Cycles from
TIMER OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H,
7H, 8H, to 9H.
