6
LT4636 (ISS 13)
SECTION THREE Fuel Bed Layout (user instructions)
It is important that all the coals, pebbles and moulded shapes are positioned as shown in these instructions.
Two alternative Fuel Beds are available:-
A.
COAL
B.
PEBBLE
Identify the fuel bed and assemble as shown below
COAL FUEL BED
Some soot deposits will form on the coals, this is perfectly normal and adds to the realism of the appliance. Some
heat discolouration of the ceramic sides is normal and does not detract from the operation of the appliance in any
way.
USE ONLY THE COALS PROVIDED - no additional coals MUST ADDED.
The Loose coal set consists of: -
Rear Matrix
Front Coal Matrix
Loose Coals – 16 coals (Curved L shape)
Ensure the rear matrix is in position as shown.
Positioned well back against the rear of the
appliance. Make sure that the burner slot is clearly
visible as shown below.
Locate the front coal matrix with the shapes
upwards in front of the rear matrix. Ensure that it is
not placed on top of the burner slot.
Summary of Contents for Paragon SlimLine 3 Slide
Page 28: ...27 LT4636 ISS 8 ...