background image

 

 

Megabeat Pro

 

 

 

_If you stop click recording while song is playing, the click will be automatically integrated 

within the remaining part of the song. This integration will be done according to the 

rhythmic informations contained in the last recorded measure. However, because the audio 

file features, it will be better to record click on the whole song (since starting to ending). 

_While playing, all parameters set on page “UTILITY/MIDI SETUP/CLICK” (related on 

both MIDI and audio files) will be the working ones. 

_The “CUT” function will not work on any audio files where the click has been already 

recorded.  
_When in CLICK mode, if you are working with an external sound module, the click will 
be generated by MIDI OUT 1 port while MIDI OUT 2 port will transmit all data of the 
song currently playing. 
_Audio files with assigned CLICK will become incompatible on previows 2.3 O.S. 
_After installing 2.3 O.S. check, in page “VOCALIZER / SONG VOCALIZER (PLAY) / 
MANUAL VOCALIZER (STOP)”, the parameter “STATUS” is setted on “DISABLE” 
( if not set it to “DISABLE” )

 

 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 

 

 

4

Summary of Contents for Megabeat Pro






Reviews: