Megabeat Pro
By selecting “CLICK” the same word will appear between “SAVE” and “CHANGE”, allowing
to enter the “CLICK PARAMETERS” page.
CLICK PARAMETERS
SOUND : METRONOME CLICK
FIRST BEAT LEVEL : 127
OTHER BEATS LEVEL : 080
RESOLUTION : 4th
PRECOUNT : 001
| |CHANGE| CHECK | EXIT
_SOUND : You can choose among 12 presets (single sounds or sound combinations) your
favorite one to play the metronomic click.
_FIRST BEAT LEVEL : Level of the first quarter of the measure.
_OTHER BEATS LEVEL : Level of the remaining quarters.
_RESOLUTION : Click resolution settings.
_PRECOUNT : Choice of the number of “empty” measures (where the click has to play)
before song starting.
Notes :
All click settings are saved by the “SAVE” key, into “MIDI SETUP” page.
IMPORTANT
:
Be sure to plug into the “CLICK” output port only stereo jacks and connect the cable to a
stereo input (i.e. headphones amplifier).
If you need to connect mono devices (i.e. monitors), be sure to use the “insert-type” cables
(stereo jack into two mono jacks) or a cable as follows:
“CLICK” output (Megabeat Pro) : stereo jack, by using one of its channels (left or right)
“CLICK” input (i.e. monitor) : mono jack
(the cable can be mono)
2
