LT-FSDC
2
nd
Printing
Page 3 of 13
4.
INSTALLATION
Gather the following equipment to perform the FSDC installation.
Philips and flathead screwdrivers
5 mm
(or 3/16”) Allen wrench
Measuring tape
Hose clamps
Cable marking tool
Assorted cable ties
Bag of parts (provided with the FSDC)
Knife or snips (to cut grommets)
Buffer tube stripper tool (score/cut buffer tubes)
Fiber optic stripper tool
Fiber splicing tools and equipment
Safety glasses and work gloves
4.1
Route Express Cable Loop into Closure
Step
Number
Instruction
1
Use a flathead screwdriver to pry open the four hinged latches that
hold the FSDC closed.
Note: The accessory bag includes a closure cover stop, which can be
placed in the door hinge to hold the door securely open.
2
Locate the express port (oval port) on the
bottom of the FSDC. Use a 5 mm
(or 3/16”)
Allen wrench to remove the sealing
components.
Note: The express port can accommodate
cable with OD from 10 to 17.5 mm (0.394 to
0.689 inches).
3
Slit the rubber middle gasket apart on the
outsides.
Separate the pieces of the plastic inner
gasket.
Set these gaskets aside.
4
Set aside the screws from the plastic outer
gasket.
Remove the metal compression plate that
seals the express loop plug in the port.
Disassemble the plastic outer gasket and set
the components aside.
