background image

Warranty - 24

SK5BB Operator’s Manual

CMW

Warranty

Ditch Witch Equipment and Parts

Limited Warranty Policy

Subject to the limitations and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for 
any Ditch Witch equipment or parts manufactured by The Charles Machine Works, Inc. (CMW) that fail due to a defect in material or 
workmanship within one (1) year of first commercial use (Exception: 2 years for all SK500 attachments). Free labor will be provided at 
any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following initial commercial use 
of the serial-numbered Ditch Witch equipment on which it is installed.

Exclusions from Product Warranty

Wear-related failure of parts subject to ground contact including, but not limited to, digging teeth, digging chains, sprockets, 
backhoe buckets, plow blades, drill pipe, drill bits, backreamers, and swivels.

All incidental or consequential damages.

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for 
which products were intended.

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with 
manufacturer’s recommendations.

All engines and engine accessories (these are covered by original manufacturer’s warranty).

Tires, belts, and other parts which may be subject to another manufacturer’s warranty (such warranty will be available to 
purchaser).

All implied warranties not expressly stated herein, including any warranty of fitness for a particular purpose and merchantability.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES AS DEFINED BY THE UNIFORM COMMERCIAL CODE, 
THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED 
WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED 
WARRANTY APPLY INCLUDING THE DUTIES IMPOSED.

Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver 
acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working 
conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by CMW or its authorized 
dealer. CMW will provide the location of its inspection facilities or its nearest authorized dealer upon inquiry. CMW reserves the right 
to supply remanufactured replacements parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or CMW.

Some states do not allow exclusion or limitation of incidental or consequential damages, so above limitation of exclusion may not 
apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may 
not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary 
from state to state.

For information regarding this limited warranty, contact CMW’s Product Support department, P.O. Box 66, Perry, OK 73077-0066, or 
contact your local Ditch Witch dealer. 

First version: 1/91;  Latest version: 1/03

Summary of Contents for Ditch Witch SK5BB




























Reviews: