background image

SK5BB Operator’s Manual

Service and Specifications - 19

Service

Service and Specifications

Service

10-Hour

Check Hydraulic Hoses and Fittings 

Check hydraulic hoses for leaks every 10 hours.

Task

Notes

Check hydraulic hoses and fittings (with hydraulic swing)

Check condition of backfill blade

Fluid or air pressure could pierce skin and cause injury or 

death. Stay away.

NOTICE: 

Escaping pressurized fluid can cause injury or pierce skin and poison.

Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure. 
Lower, block, or support any raised component with a hoist. Cover connection with heavy cloth and 
loosen connector nut slightly to relieve residual pressure. Catch all fluid in a container.

Before using system, check that all connections are tight and all lines are undamaged.

Fluid leaks can be hard to detect. Use a piece of cardboard or wood, rather than hands, to search 
for leaks.

Wear protective clothing, including gloves and eye protection.

If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.

Summary of Contents for Ditch Witch SK5BB




























Reviews: