Charles Machine Works Ditch Witch RT125, Operator'S Manual

Page: 151 / 231

Complete the Job - 150
RT125 Operator’s Manual
Restore Jobsite
Restore Jobsite
After product is installed, return spoils to the
trench with optional backfill blade.
Backfilling
1. Ensure the seat is facing forward or in the 60°
position. See “Pivot control” on page 54.
2. Position unit at end of trench, several feet
from spoils. Aim tractor at outer edge of
spoils.
3. Adjust backfill blade to fit land contour.
4. Move outer edge of spoils toward trench.
Take two or more passes at spoils rather than
moving all spoils at once.
5. Repeat on other side of trench, if necessary.
6. Engage float and make final pass over trench.
Rinse Equipment
Spray water onto equipment to remove dirt and mud.
Stow Tools
Ensure all tools and accessories are loaded and properly secured on trailer.
NOTICE:
• Do not spray water onto operator’s console. Electrical components could be damaged. Wipe down
instead.
• Ensure all mud and debris is rinsed from operator’s station floor.
• Ensure all mud and debris is rinsed from wheels before parking unit overnight.