C6050A, C6050B
v2.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~15S LiPo/LiFe battery
1~55Amps 3050W max.
www.chargery.com
page
7
total
19
Tips
All parameters will be remembered by the C6050 till next change
.
Choose battery type, and press knob for 3 seconds start to charge at last setup, save operating
time.
Auto mode operation instructions
When you need charge same one battery repeat, you can set up Auto Charge is yes on first charge
(Only for C6050B), the charger will charge automatically next time, need not setup any parameters.
At AUTO charge, press Knob button shortly can stop charging at any time, and press it again start to
charge. Or during charge, disconnect battery stop charging, and connect it, start to charge again.
When need to charge new battery at different parameters, disconnect battery, at AUTO interface,
press Knob button for 3 seconds alternate idle interface, the charger will work at intelligent operate
mode, all parameters can setup in this mode.
for
more
details
of
auto
mode,
Please
down
load
the
video
on
http://www.chargery.com/Video/C10325_Automode.mp4
. For C6050B charger, the process is as same as
with C10325.
