C6050A, C6050B
v2.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~15S LiPo/LiFe battery
1~55Amps 3050W max.
www.chargery.com
page
17
total
19
Application Notes.
Storage Energy System
If C6050 charger applied to large capacity energy System such as PV system, C6050A is suggested, the
charge current can be controlled by remote device. The C6050A can receive PWM signal and adjust
charge current.
The current range is 1A to 55A.
When PWM duty cycle under 10%, C6050 will stop charging.
When PWM signal fail, the charger will charge at the current setup by manual.
E-car or other E- Vehicle
When C6050 applied to E-car or other E- Vehicle battery,
C6050B is suggested, and Auto charge mode is
the best, after setup all charge parameters on first charge and setup Auto Charge YES, the charger can
charge the battery automatically next time. Need not any operation besides connect AC power source
and battery to the charger.
RC or UAV
When C6050 need charge multiply chemistry battery, C6050B is suggested, on normal work mode, the
charger is easy to set up for all kinds of battery. It is enough flexible to meet almost challenge.
