Dual Input Synchronous Balancer/Charger/Discharger
C4012B V1.24
www.chargery.com
page 4 total 18
Mechanical Characteristics
Size
：
281*170*68 (L
×
W
×
H, mm) or 11.1
×
6.69
×
2.68 (L
×
W
×
H, inch)
Weight: 3.5Kg without any accessories.
Input power cable: AWG14 wire, 600mm length for DC; AWG14 wire 1.5m length for AC
Output DC connector: XT-90 male connector
Packaging Content
Charger unit: 1pcs
Power cable for DC: 1pcs, AWG14 wire, 600mm length with 4mm gold male connector
Power cable for AC: 1pcs, AWG14 wire, 1500mm length
USB data line: 1pcs
Temperature sense lead: 1pcs
adapter wire: 2pcs, connect charger to adapter board
adapter board:2pcs
XT-90 female conntor:1pcs
Interface
DC Input
Connect to power supply or battery, DC voltage range is 10V to 28V, absolutely 30V maximal
AC Input
Connect to AC source 90-265V 50/60Hz
USB port
Connect to PC update the firmware by Chargery UpdateTool.
Output port
Connect to battery.
Temperature
sensor port
Connect to temperature sensor monitor battery temperature, the sensor must be pasted
tightly battery during charge or discharge. battery temperature can affect battery life and
performance seriously, the maximal temperature should not be over 40
℃
during charge.
Balance port
Connect to adapter board or battery directly for Balance charge or Balance only.
STOP/SET
When the charger operate any program, Press STOP button terminate it.
In main interface, and no any program operate, Press for 2 seconds get the cell and battery
impedance.
Knob
Decrease parameter value or alternate menu item by rotate the Knob clockwise
Increase parameter value or alternate menu item by rotate the Knob counterclockwise
Knob
In main interface, press Knob for 3 seconds, the unit will enter into function interface directly,
press for 3 seconds will operate last program directly.
In Battery Type interface, press for 3 seconds, the unit will enter into charger setting menu.
In Memory Select interface, press for 3 seconds, the unit can edit memory name
In function interface, press for 3 seconds, the unit will operate chosen program.
DC Input
USB port
Output port
Temperature Sensor
Balance port
AC Input
