C10325A
v2.2, C10325B V2.2
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~24S LiPo/LiFe battery
1~25Amps 1500W max.
www.chargery.com
page
7
total
19
Tips
All parameters will be remembered by the C10325A/B till next change
.
Choose battery type, and press knob for 3 seconds start to charge at last setup
Auto mode operation instructions
When you need charge same one battery repeat, you can set up Auto Charge is yes (Only for
C10325B), the charger will charge automatically next time, need not setup any parameters. At AUTO
charge, press Knob button shortly stop charging at any time, and press it again start to charge. Or
during charge, disconnect battery stop charging, and connect it, start to charge again automatically.
When need to charge new battery at different parameters, disconnect battery at AUTO interface,
press Knob button for 3 seconds alternate idle interface, the charger will work at intelligent operate
mode, all parameters can be setup in this mode.
for more details about auto mode, Please watch the video on
http://www.chargery.com/Video/C10325_Automode.mp4
.
