C10325A
v2.2, C10325B V2.2
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~24S LiPo/LiFe battery
1~25Amps 1500W max.
www.chargery.com
page
17
total
19
Application Notes.
Storage Energy System
If C10325A/B charger applied to large capacity energy System such as PV system, C6050A is suggested,
the charge current can be controlled by remote device. The C10325A can receive PWM signal and adjust
charge current.
The current range is 1A to 25A.
When PWM duty cycle under 10%, C10325A will stop charging.
When PWM signal fail, the charger will charge at the settings by manual.
E-car or other E- Vehicle
When C10325A/B applied to E-car or other E- Vehicle battery,
C10325B is suggested, and Auto charge
mode is the best, after setup all charge parameters and setup Auto Charge YES, the charger can charge
the battery automatically next time. Need not any operation besides connect AC power source and
battery to the charger.
RC or UAV
When C10325A/B need charge multiply chemistry battery, C10325B is suggested, on normal work mode,
the charger is easy to set up for all kinds of battery. It is enough flexible to meet almost challenge.
