CAUTION:
Allow appliance to completely cool before cleaning any component.
• In order to change the oil, remove the cooking tank and pour the oil
out at the corner.
• Clean the deep frying fat container, the lid and the housing with a damp cloth and
household detergent if necessary. DO NOT immerse in water.
• The deep frying basket can be cleaned with soapy water.
• Ensure that all moisture is removed prior to storage or use.
Housing
Clean the housing after use with a slightly damp cloth.
Device is Not Working
• Check that the magnetic power cord is properly connected.
• Check the position of the thermostat.
• The device is fitted with a RESET SWITCH (7). This prevents the heater
being switched on accidentally. Check that the control element is
correctly in place.
Overheating Protection
• If you should accidentally switch on your deep fat fryer when there is no oil or
fat in it, the overheating protection is activated. The appliance will need to be
unplugged and allowed to completely cool.
• Only after the device has been left to cool down completely should the “RESTART“
button on the rear of the control element be operated in order to use the deep fat
fryer again. For this you should use an object that is at least 2 1/2
"
long.
Restart Instructionss
• Unplug the unit, and let the oil cool. Press the
restart button on the back of the control panel. You
will need a wire about 2 1/2
"
long to press the reset
button. Reinsert the control panel into the guide
gears being sure that the safety switch is engaged.
Plug the unit back into the power source, and turn
the knob to the “ON” position.
CLEANING INSTRUCTIONS
TROUBLESHOOTING
7
