GENERAL SAFETY INSTRUCTIONS
CAUTION:
In the case of food types which are too moist (e.g. frozen chips etc.) large
amounts of foam may form, which under certain circumstances may cause the oil to overflow.
Use
1. Make sure that the appliance is unplugged and switched off (The control lamps are off).
2. Take the lid off the deep fryer.
3. Remove the frying basket and fill the container with oil or fat (maximum 3 liters). For fat
see caution on previous page. The filling level must be located between the minimum
and the maximum level (maximum 3 liters).
4. Insert the plug into a standard 120 V AC outlet. The red control lamp lights up. Set the
desired temperature by turning the temperature control knob (2).
5. The green control lamp lights up. Once the set temperature has been reached the
green control lamp goes off. Place the frying basket containing the items to be fried
slowly and carefully into the hot oil or fat.
6. The green control lamp switches on and off several times during frying. This is normal
and it indicates that the temperature is controlled by the thermostat and is being
maintained. Once the frying time is over (the frying times are to be found on the
packaging of the food or in the recipe), please take out the frying basket.
7. Let the oil drip from the food being fried.
8. In order to switch off the machine, please turn the temperature regulator to OFF and
remove the plug from the socket. Allow unit to completely cool, then wind the main cord
up in the form of a spiral in the cord compartment.
CAUTION:
• DO NOT use any wire brush or other abrasive objects.
• DO NOT use any acidic or abrasive detergents.
• Under no circumstances should the device be immersed in water for cleaning.
WARNING:
Always remove plug from outlet, and allow the unit to completely cool, before cleaning.
WARNING:
Always remove plug from outlet, and allow the unit to completely cool, before cleaning.
WARNING:
Be sure the food product in the basket does not cause the oil level to exceed the MAX
FILL LINE. If the oil level exceeds this line during use, and the control panel stops working,
please see “RESTART” Instructions on Page 7 under TROUBLESHOOTING.
3
