background image

Accessory Use and Storage

Cooking

Basket

NOTE:  

Before cooking on your appliance for the first time, refer to the separate Cooking Guide on how to prepare the appliance for 

cooking.  It is recommended that you season your appliance prior to cooking

.

Once seasoning is complete, the appliance is now ready for use.  The cooking chamber will continue to darken with use. This will 

inhibit rusting along with improving the performance of the infrared cooking system.

The bottom of the 

Cooking Grate

 has a locating ring. Be sure that the locating ring faces down and is centered in the 

cooking Chamber when using the 

Cooking Grate

. Otherwise, the 

Cooking Grate

 could slip off the top of the 

appliance.

Never use the Cooking Grate upside down!

Cooking Grate shown

in  proper position.

Assembling your 

Half Racks

 into the cooking basket is very easy. 

Just insert the 

Half Rack

 through the side of the cooking basket at the desired 

level.
Allow the 

Half Rack

 legs to rest securely on the cooking basket wire.

Make sure the legs are OUTSIDE of the cooking basket. This prevents the 

Half Racks

 from slipping.

Two 

Half Racks

 are included with your Smoker, Roaster, & Grill. Please visit us at 

www.charbroil.com

 and click on the 

Buy Online

 link to purchase additional 

Half Rack

 sets.

When using the 

Cooking Basket

, insert it into the 

Cooking Chamber

 as 

shown. 

All four Legs outside 
of cooking basket.

Locating

Ring on bottom 

of Cooking Grate

Locating

Ring

Never use the
Cooking Grate
upside down!

Note:
Cooking Grate
shown
transparent
for clarity

Page 17

Summary of Contents for The Big Easy 10101550

























Reviews: