3
• Slide axle into holes at ends of short legs
(legs without end caps).
• Attach wheels onto axle rod using cotter
pins. Bend cotter pin ends to prevent them
from backing out of axle as shown in box A.
Check to be sure that all screws and nuts
used so far are fully tightened.
4
• Place the firebox onto the smoker chamber
and align the large openings.
• Insert six
1/4-20x1/2”
screws through the
firebox, into the smoker chamber. Secure
with six
1/4-20
flange nuts.
Fully tighten all screws and nuts.
Axle
Wheel
Firebox
Cotter Pin
Axle
Cotter pin
A
