background image

12    

Match-Lighting

s

 Do not lean over grill while lighting.

1. Open lid. 

Turn 

ON

 gas at LP cylinder.

 

3. 

Push in and turn far left burner knob to the 

HI

 position.

Be sure burner lights and stays lit.

4. 

Light adjacent burners in sequence by pushing knobs in and 

turning to the 

HI

 position.

CAUTION

If ignition does NOT occur in 5 seconds, turn the 
burner controls OFF, wait 5 minutes and repeat the 
lighting procedure. If the burner does not ignite with 
the valve open, gas will continue to flow out of the 
burner and could accidently ignite with risk of injury.

Turn controls and gas source or tank OFF when not 
in use.

WARNING

Sideburner Ignitor Lighting

s

 

 Do not lean over grill while lighting.

1. Open sideburner lid. 

Turn 

ON

 gas at LP cylinder.

2. 

Turn sideburner knob to the 

HI

 position, push and hold

ELECTRONIC IGNITOR

 button.

3. 

If sideburner does NOT light within 5 seconds, turn knob to 

OFF

wait 5 minutes, then 

Sideburner Match Lighting

1. Open sideburner lid. 

Turn 

ON

2. 

Place lit match near burner.

3. 

Turn sideburner knob to the

Be sure burner lights and
stays lit.

2.

 Place match into match holder (hanging from left side panel of 

grill). Light match; then light burner by placing match through 
the match light hole on left side of grill.

HI

 position.

8.

 

For grills equipped with ELECTRONIC IGNITION at

Repeat steps 4 through 6 to light each burner.

9.

 Once each burner has ignited, turn knobs to desired setting.

each burner:

gas at LP cylinder.

repeat lighting procedure.

NOTE: Your grill may NOT be equipped with a Sideburner!

Ignitor Lighting

s

 

 Do not lean over grill while lighting.

1.
2.
3.
4.
5.

Turn 

OFF

 gas burner control valves. 

Turn 

ON

 gas at LP cylinder.

Open lid during lighting.

To ignite, push and turn 

IGNITION BURNER

 knob to 

HI

lights.

6. 

If ignition does NOT occur in 5 seconds, turn the burner 

controls 

OFF

, wait 5 minutes and repeat the lighting 

procedure.

7.

 To ignite remaining burners, turn knob to the 

HI

 position 

starting with the burners closest to IGNITION BURNER first.
If ignitor does not work, follow match lighting instructions. 

P

. ush and hold 

ELECTRONIC IGNITION

 button until the burner 

SEAR Burner Ignitor Lighting

s

 

 Do not lean over grill while lighting.

1.
2.
3.
4.
5.

Turn 

OFF

 gas burner control valves. 

Turn 

ON

 gas at LP cylinder.

Open lid during lighting.

To ignite, push and turn SEAR burner knob to 

HI

lights.

6. 

If ignition does NOT occur in 5 seconds, turn the burner 

controls 

OFF

, wait 5 minutes and repeat the lighting 

procedure.

P

. ush and hold 

ELECTRONIC IGNITION

 button until the burner 

SEAR Burner Match-Lighting

s

 Do not lean over grill while lighting.

1. Open lid. 

Turn 

ON

 gas at LP cylinder.

 

3. 

Push in and turn SEAR burner knob to the 

HI

burner lights and stays lit.

2.

 Place match into match holder (hanging from right side panel 

of grill). Light match; then light burner by placing match 
through the match light hole on right side of grill.

position. Be sure

Summary of Contents for 466230712





































Reviews: